Turbo Manifold-T6

NEW OPEN SCROLL T6 CAST STAINLESS STEEL MANIFOLD. GM LS based turbo manifold.  This thick wall cast stainless steel swept runner manifold with an industry first.. Manifold is plenty strong to hold up even to the most demanding conditions. Runners are swept and opened to maximize the flow from each runner. Standard 46mm Vband waste gate flange is welded right into the side of the manifold. This is the last point before the turbo. The T6 turbo mount is a TRUE T6 opening, not a T6 flange with a 2.5" hole cut into it. By removing any transition inside the manifold,this maximizes the flow. The T6 flange, crossover flanges are drilled and tapped for studs.    Fits LS style heads. Manifold comes with studs,nuts for the turbo and the crossover flange.  Crossover flanges,  and hardware can be added to your purchase.. Gaskets are avialable for an added cost. OPEN SCROLL manifold has a large volume to handle more cubic inches.  You can also switch the inlet to a 2.5" Vband inlet flange. We cut the 3bolt flange off, and weld a 2.5" vband inlet in its place. Price includes both sides of the vband flange set and the clamp. !!!THIS PRODUCT IS FOR OFF-ROAD USE ONLY!!! !!!NOT INTENDED FOR HIGHWAY USE!!!  Mutli-angle plug wires are needed example  MSD 32813 or 32823 Cast Stainless Steel T6 OPEN SCROLL DESIGN Thick Casting to handle heavy loads Welded V-band flange for waste gates Mounting holes are threaded Studs and nuts are included ( studs are M10 x 1.25 x 42long)